When microbial activity is identified in a fuel tank a PureFuel Recirculation & Recovery machine is the fastest means of decontaminating and returning the fuel to its optimum clear and pure condition.
The FM 2300 CSM uses a five-stage fuel polishing process to decontaminate (x2), filter (x2) and then extract water from the fuel.
The FM 2300 CSM requires a separate pump (not included).
* The recommended pumps are all matched to the flow ratings of the conditioning and filtration units. Pumps with greater flow rate potential may be used in order to achieve greater lift and head but the maximum flow rate of 120 litres/minute through the
FM 2300 CSM must not be exceeded.
The FM 2300 CSM uses a five-stage fuel polishing process to decontaminate (x2), filter (x2) and then extract water from the fuel.
The FM 2300 CSM requires a separate pump (not included).
* The recommended pumps are all matched to the flow ratings of the conditioning and filtration units. Pumps with greater flow rate potential may be used in order to achieve greater lift and head but the maximum flow rate of 120 litres/minute through the
FM 2300 CSM must not be exceeded.
FM2300CSM Recirculation & Recovery Machine
Tank capacity
Flow rate Fuel types Fluid viscosity |
<40,000 litres <80 litres/minutes E10 RON95/98 EN590 B5 B30 B100 BS2869 32.6 - 48 SSU |
|
 |
||
FIVE-STAGE PROCESS |
||
1 Decontamination 2 Decontamination 3 Primary filter 4 Secondary filter 5 Water separator |
PureFuel FM ISO 25 PureFuel FM ISO 40 25μ 5μ Wound cotton |
|
|
||
Pressure Monitoring Flow monitoring |
Analogue gauge (x4) Mechanical counter |
|
|
||
Fuel line inlet Fuel line outlet |
1" 1" |
|
|
||
Construction |
Mild steel/Aluminium |
|
|
||
Earthing
|
Earth strap |
|
|
||
Dimensions |
1780x790x1400mm |
|
|
||
PureFuel Pump Options* |
|
FOR ALL FUEL TYPES |
|
FOR DIESEL AND BIO-DIESEL ONLY: Diesel Transfer Pump ATEX Approved: No Flow rate: 90 – 100 litres/min Suction Lift: 14m Head: 20m Foot valve: Yes Inlet: 1” Power: 110 V UK (240V EU) |